Rock Drill Rig
Nkọwa ngwaahịa
Nkuku nkume bụ ụdị akụrụngwa na-egwupụta ihe site n'ịgbanwe ike hydraulic ka ọ bụrụ ike igwe.Ọ mejupụtara usoro mmetụta, usoro ntụgharị na mmiri na gas slag sistem.
DR100 hydraulic rock drill
| Nka nka nka DR100 Rock Rock Drill | |
| Dayameta igwu mmiri | 25-55 mm |
| Mmetụta Mmetụta | 140-180 mmanya |
| Mmetụta Mmetụta | 40-60 L/min |
| Ugboro mmetụta | 3000 bpm |
| Ike mmetụta | 7kw |
| Nrụgide Rotary (Max.) | 140 Bar |
| Usoro ntụgharị | 30-50 L/min |
| Rotary Torque (Max.) | 300 Nm |
| Ọsọ Rotary | 300 rpm |
| Shank nkwụnye | R32 |
| Ibu | 80 n'arọ |
DR150 hydraulic rock drill
| Nka nka nka DR150 Rock Rock Drill | |
| Dayameta igwu mmiri | 64-89 mm |
| Mmetụta Mmetụta | 150-180 mmanya |
| Mmetụta Mmetụta | 50-80 L/min |
| Ugboro mmetụta | 3000 bpm |
| Ike mmetụta | 18 kw |
| Nrụgide Rotary (Max.) | 180 Bar |
| Usoro ntụgharị | 40-60 L/min |
| Rotary Torque (Max.) | 600 Nm |
| Ọsọ Rotary | 250 rpm |
| Shank nkwụnye | R38/T38/T45 |
| Ibu | 130 n'arọ |
Igwe ihe owuwu dabara adaba
Kedu ụdị igwe eji arụ ọrụ na njirimara ngwaahịa nwere ike ịme site na egwu egwu Rock?
①Ọwara ụgbọ ala ụgbọ ala
A na-ejikarị arụ ọrụ ọwara, oghere gbawara agbawa.Mgbe a na-etinye usoro ịkụ ala na ịgbawa ọkụ iji gwupụta ọwara ahụ, ọ na-enye ọnọdụ dị mma maka ịkụ ụgbọ ala, na ngwakọta nke ụgbọ ala ụgbọ ala na ihe nkwụnye ballast nwere ike ime ka ngwa ngwa ihe owuwu ahụ dịkwuo elu, melite mmepụta ọrụ ma melite ọnọdụ ọrụ.
②Ngwakọta hydraulic
akuakuzinwo
Kwesịrị ekwesị maka ịgbawa ụda nkume dị nro, nkume siri ike na nkume siri ike nke ukwuu n'ime ogbunigwe mepere emepe, ebe a na-egwupụta ihe na ụdị nzọụkwụ ọ bụla.Enwere ike imeju ihe achọrọ nke nrụpụta dị elu
③Excavator arụgharịrị n'ime akuakuzinwo
Excavator refitted n'ime akuakuzinwo bụ nke abụọ mmepe na excavator n'elu ikpo okwu ka kacha-eme ka ojiji nke excavator na-eme ka excavator adabara ọzọ ọrụ chọrọ.Enwere ike iji ya na ọnọdụ ọrụ dị iche iche, dị ka: Ngwuputa ihe, olulu mmiri, ikpo okwute okwute, arịlịka, eriri arịlịka, wdg.
④Multi-hole akuakuzinwo
Enwere ike ịwụnye ihe ọkụkụ na nkewa n'elu onye na-egwupụta ihe n'otu oge iji mechaa mkpọpu na splicing n'otu oge.Ọ nwere ike melite arụmọrụ ọrụ, n'ezie nweta igwe nwere ọtụtụ ebumnuche, igwu ala, mkpọpu ala, kewaa.
⑤ Ịkụ ala na nkewa igwe niile na-adị n'otu
⑥Ịkụba okporo ụzọ
Nkọwa ndị ọzọ
Isi akụkụ aha
1. Bit shank 2. Injection ventilashion complement 3. Igbe ịnya ụgbọ ala 4. Hydraulic moto 5.energy accumulator
6. Mgbakọ mmetụta 7. Ihe nkwụghachi mmanụ
Akụkụ mmetụta
Mbukota & Mbupu
FAQ
1.Ị nwere ike inye nkwado teknụzụ?
Anyị nwere ahụmịhe bara ụba na mpaghara mkpọ ala, TYSIM na-enye ihe ngwọta mgbapu oghere.
2.Ị nwere ike ịgwa anyị oge nnyefe?
N'ozuzu, ọ bụ 5-15 ụbọchị ma ọ bụrụ na ngwaahịa dị na ngwaahịa.
3.Ị na-anabata obere usoro ma ọ bụ LCL?
Anyị na-enye LCL na FCL ọrụ site ikuku, oké osimiri, nakwa ala ụzọ mba.
